CASE STUDY SM700-ST

Sieve provides high throughput

Requirement:
To provide a machine suitable for the removal of any oversized product from black toner. In addition the unit needed to be easily dismantled for cleaning, and have seals which provided a dust tight arrangement without leakage. Company had already tried competitors’ machines without total success.

Operation:
Fed from vacuum hopper loader unit above sieve. Discharge through floor into process line.

Solution:
Farleygreene adapted a Sievmaster 700-ST High Speed unit for trial. The machine was fitted with a single screen sieve but with machined inner rings bonded to the original pans to provide a perfectly flat surface to seal, the spun pans appeared flat but the minor irregularities in the forming did not provide a sufficiently flat surface to seal. Additional clamps were also fitted to increase the seal clamping surface area. Triclover clamps were used to provide a sealed interface to the delivery and discharge outlets (subsequently changed for a specially made system).

The machine performed outstandingly providing a higher yield throughput than any other machine tested, even those who provided ultrasonic versions.
The machine was provided with a vacuum transfer hopper loader to transport the toner to the sieve. The whole assembly being mounted within a special mobile frame, allowing access from 3 sides.

Result:
Customer received a turnkey solution to suit the problems he was experiencing, fitting into the existing production area with minimum modifications.

SM700-typical-Industrial-Flour-Sieve-Sifters-Manufactures

Convinced?

Arrange a free demo today at our factory in Hampshire to see our products in action.

  • This field is for validation purposes and should be left unchanged.