CASE STUDY SM MULTISCREEN 1200

Sieve screening to increase production rate

Requirement:
To provide the removal of oversize and fines from a dried herb. The oversize portion being recycled for regrind, the fines (dust) for use elsewhere. Client required a specific sized product suitable for supermarket display.

Operation:
Fed from cutting/grind unit above. Discharge of fractions into various receptacles depending on the size.

Solution:
A Sievmaster 1200 Multiscreen unit was utilised fitted with two sieve screens, the top screen removing oversize and the lower the fine product. The large diameter unit provided an adequate area for the product to flow out from the screen centre to allow it to present each flake of herb to the screen thus obtaining an accurate separation with minimal product losses.
Unit was mounted upon a raised fixed stand to obtain the required discharge heights suitable for their production. Enclosed top with the discharge outlets sleeved to prevent dust.

Result:
Machine adequately separated the product as required with volume to spare. Resulted in them being able to increase production rate as order situation increased

Convinced?

Arrange a free demo today at our factory in Hampshire to see our products in action.

  • This field is for validation purposes and should be left unchanged.